Keysight Technologies C Series User Manual page 795

Fieldfox analyzers

System SettingsFUTURE

3. Use arrow keys

6. Repeat steps

Group Save File Types

— State+Trace (.sta) – Enables/Disables .sta as a group. file to be saved when

— State (.sta) – Enables/disables .sta files as a group file to be saved when

— Image (.png) – Enables/disables .png files as a group file to be saved when

— CSV Data (.png) – Enables/disables .csv data files as a part of the group

— S1P Data (.s1p) – Enables/disables .s1p data files as a part of the group

— S2P Data (.s2p) – Enables/disables .s2p data files as a part of the group

— Matalab Data (.mat) – Enables/disables .mat data files as a part of the

— SDF Data (.sdf) – Enables/disables .sdf data files as a part of the group files

CAT (Distance Units)

Choose the CAT distance units (i.e., Meters (default), Feet, Inches). See

Units" on page

How to select CAT distance units:

1. Press System 7 >

Keysight N9915-90020 User's Guide

or knob to scroll down to until your choice is

highlighted then:

'file type' Data (.xxx)

Off). (e.g.,

Image (.png) ON

to exit the current data type softkey menu.

to exit the Preferences menu and save your Preferences.

the Quick Save (Save/Recall 9) hardkey is pressed for ~3 seconds.

files to be saved when the Quick Save (Save/Recall 9) hardkey is pressed for

files to be saved when the Quick Save (Save/Recall 9) hardkey is pressed for

files to be saved when the Quick Save (Save/Recall 9) hardkey is pressed for

group files to be saved when the Quick Save (Save/Recall 9) hardkey is

pressed for ~3 seconds.

to be saved when the Quick Save (Save/Recall 9) hardkey is pressed for ~3

for each of the following:

to enable/disable the data file type (default =

CSV Data (.csv) ON

as required.

OFF, etcetera).

Chapters