Advertisement
USB Antennas – (Full Capability Requires EMF Option 358, and either SA mode (Option
233 Mixed Analyzers) or OTA—5G NR / 5G NR EVM Conducted Option 378)
How to Set Up a USB Antenna (Also, Known as EMF Antenna)
Editing Antenna Correction Factors and Adding New Antenna Factors
Keysight does
If New is selected under the X, Y, or Z Antenna or Cable softkey menu,
whatever antenna or cable factors that have been imported as the default
values and are displayed in the Settings table.
For procedures illustrating how to edit the Antenna Factors settings table
values, refer to:
— SA Mode:
— OTA Mode:
Figure 15-6
SA Mode – Example Editing and Adding a New X axis antenna
470
not
recommend editing a USB antenna's correction factors.
"How to Set Up EMF Settings (Requires EMF (Option 358), GPS
(Option 307), and SA Mode (Option 233–Mixed Analyzers))" on page 230
"How to Set Up EMF Mode Settings (Requires EMF (Option
358) and 5G NR (Option 378))" on page 400
Keysight N9915-90015 User's Guide
Advertisement
Chapters
