Advertisement
5G Rapid Prototype Phased Array Antenna – Option 360
How to Set Up Phased Array Antenna Settings
IMPORTANT! The LAN address for first 3 fields must match the Static IP
address of FieldFox. For example, if the Ball Antenna IP address is
192.168.1.10, set FieldFox Static IP address to 192.168.1.xx. "xx" must be
different number than shown in the last field of the for Ball Antenna. Refer
to
IMPORTANT! If you forget you N9910X-028 Ball Antenna's static IP
address, refer to this link and the Support tab for assistance:
www.keysight.com/find/fieldfox
Support Document.
3. Selecting phased array antenna mode using the Antenna Wizard:
Once the connect is correct, the FieldFox's displayed annotation indicating
"Check LAN connection. Check IP address." is no longer displayed
during pinging of the Host IP address.
Figure 14-12
Antenna Wizard Screen
4. Aligning the antenna's azimuth and elevation orientation:
434
c. Press
Done Edit
Figure 14-15 on page
a. Press Measure.
b. Then
Antenna Wizard
c. Follow the prompts. See
Refer to
Figure 14-14 on page
>
Done
443.
and then to the Phase Array Antenna
Figure
14-12.
436.
Keysight N9915-90020 User's Guide
Advertisement
Chapters
