Advertisement
Keysight Handheld Analyzers
N99xxC User's Guide
17 Direction Finding (Option 390 Time Difference of Arrival
(TDoA)) – Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307)
IMPORTANT!
B model FieldFox units require S9910A Pathwave Keysight Signal
Measurement Software KSMS software to use the TDoA Option 390. Learn
more, refer to
https://www.keysight.com/us/en/products/software/pathwave-test-soft
ware/pathwave-measurements.html.
S9910A Keysight Signal Measurement Software (KSMS) is a PC-based
software which enables you to use the FieldFox as a receiver in direction
finding measurements. Refer to https://www.keysight.com/find/assist/.
The following Option(s) are available for use with KSMS:
— Option 390 TDoA used to geo–locate signals that were measured using the
The FieldFox requires Option 390 for TDoA direction finding and GPS (Option
307) installed.
To install the Pathwave Keysight Signal Management Software (KSMS) on your
PC, refer to
https://www.keysight.com/us/en/products/software/pathwave-test-softwar
e/pathwave-measurements.html.
For help using the Pathwave Keysight Signal Management Software (KSMS),
refer to the KSMS web help
https://www.keysight.com/us/en/products/software/pathwave-test-softwar
e/pathwave-measurements.html.
SA RF Input Port 2 connector.
525
Advertisement
Chapters
