Advertisement
Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
Glossary (Option 360)
Glossary (Option 360)
This section provides a description of some of the terms used in the FieldFox's
OTA mode.
Table 16-1
Option 360 Abbreviations and Descriptions
Abbreviation
Description
LTE FDD
Center
The specified LTE FDD carrier center frequency.
Frequency
C/S/G
Physical Cell information (PCI), or Cell ID – C/ S /G
Cell ID (PCI)
Physical cell ID – The Primary Sync Signal and Secondary Sync Signal largely define the PCI. PCI is also
referred to sometimes as Cell ID.
PSS
PSS (dBm) is the Primary Synchronization signal for an LTE downlink frame.
RSRP
Reference Symbol Received Power (dBm)
RSRQ
Reference Signal Received Quality (dBm)
RSSI
Reference Signal Strength Indicator (dBm)
SINR
Signal to Interference & Noise Ratio (dB)
SSS
SSS is the Secondary Synchronization signal for an LTE downlink frame (dBm).
Freq Error Th
LTE FDD Frequency Error Threshold (Hz). Any data that is does not meet the defined Frequency Error
value, is not displayed.
5GTF
Center
The specified 5GTF carrier center frequency.
Frequency
Cell ID (PCI)
Physical cell ID – The Primary Sync Signal and Secondary Sync Signal largely define the PCI. PCI is also
referred to sometimes as Cell ID.
Power
(Channel Power) (dBm)
PSS
PSS (dBm) is the Primary Synchronization signal for an LTE downlink frame.
SSS
SSS is the Secondary Synchronization signal for an 5GTF downlink frame (dBm).
SyncCorr Th
5GTF Synchronization Correlation Threshold (%). Any data with errors that are less than the
Synchronization Correlation Threshold (%) are not displayed.
524
Keysight N9915-90020 User's Guide
Advertisement
Chapters
