Advertisement
System SettingsFUTURE
System Configuration
Figure 31-10
GPS Display
— The left portion of the screen displays satellites and the corresponding
— The right portion of the screen displays Satellite Power Carrier to Noise
The C/No values returned are not calibrated at the factory or warranted for
accuracy. The numbers retrieved are passed unprocessed directly from the
GPS receiver in use.
GPS Status
With GPS enabled the following is displayed at the top of the FieldFox screen:
The following icons (located in
The following annotation
top-panel antenna status:
— Ant: INIT – antenna status initializing.
800
number on the adjacent Satellite Power chart.
(C/No) dBHz values on the tops of the satellite power chart.
- GPS ON and locked on satellites.
- GPS ON, but NOT locked on satellites.
- GPS ON, but no GPS receiver is present or detected.
(BLUE
RED
circle above) indicate the GPS lock status:
circle in above image) indicates the INTERNAL,
Keysight N9915-90020 User's Guide
Advertisement
Chapters
