Keysight Technologies C Series User Manual page 239

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)FUTURE
How to Set Up EMF Settings (Requires EMF (Option 358), GPS (Option 307), and SA
Mode (Option 233–Mixed Analyzers))
2. For this example, the X axis Antenna softkey menu has been selected:
Keysight N9915-90020 User's Guide
a. Then press Edit Antenna
Frequency and Antenna Factor table values that are stored in the
FieldFox [:Internal]:\Antenna\ directory (Refer to
9-25). Then you can edit the following:
— Description – edits the name of the current antenna settings
table
— Antenna Factor Unit – edits the units from dB /m electric
antenna factor to dB S/m for the magnetic antenna factors.
None is displayed, when no antenna is detected.
— Frequency – edits the frequency value measured that
corresponds to a particular Antenna Factor.
— Antenna Factor – edits the Antenna Factor (amplitude) that
corresponds to a particular frequency.
Refer to next step for details on editing the antenna Settings
table.
b. Use the arrows, the rotary knob, or numeric keypad to select
the table cell value to be edited (i.e., the Frequency Interpolation
value is not editable). Then:
i. Press Edit Antenna
New
press to add a a new antenna's factors or to write over
your existing antenna's file (i.e.,
data? is displayed above the table).
— Choose
— Choose
filename is Example).
ii. Press Add Row
Factor values.
iii. Press Delete/Clear
— Delete Row
currently selected row of Frequency and Antenna
Factors (i.e., you must press
to exit the current softkey menu).
— Clear All
currently selected rows of Frequency and Antenna
Factors (i.e., you must press
No to exit the current softkey menu).
— Back – To exit to previous softkey menu.
iv. Press Done
when finished editing to exit.
to edit the existing X axial antenna factor's
to edit your existing antenna factors or
Overwrite existing Antenna
Yes
to write over the existing antenna file.
No to create a new antenna file (default
to create additional Frequency and Antenna
then choose one of these:
– when pressed this choice deletes the
Yes
– when pressed this choice deletes all of the
Yes
Figure
to delete a row or No
to deleted the rows or
239