Advertisement
SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)FUTURE
SA Mode Settings
All Alignment and Align All Now
IMPORTANT! It is recommended that you use
includes the individual alignment InstAlign
Burst Align
manual control over the individual alignments, then refer to the SA
Individual Alignment Control setting in
Chapter 31
The notification
amplitude alignment or channel equalization is stale (if its state is Hold)
and requires an update or it is in the OFF state. This situation does not
occur when the respective alignment is in the Auto state. To clear this
notification, press the Align All Now softkey.
How to set All Alignment and Align All Now
— Press Cal 5
— Then
— or
— Then
— Press Back
If you want to disable the All Alignment [Auto], you can do so in the FieldFox
preferences (i.e., you may want to do this, for example, if you are analyzing the
amplitude stability of a signal).
Refer to the SA Individual Alignment Control setting in
page
Individual Alignments
IMPORTANT! It is recommended that you use
All Now
Align
Align All Now includes the individual alignment InstAlign
Now,
have manual control over the individual alignments, then refer to the SA
Individual Alignment Control setting in
Chapter 31
The Individual Alignment softkey is only available, when the preference SA
- Individual Alignment Control is set to On in the FieldFox Preferences
menu. Refer to
Keysight N9915-90020 User's Guide
Now, and
ChanEQ Align
System Settings.
AMPTD?
All Alignment [Auto]
Default is Auto.
Align All Now
(to manually perform an Align All Now.) This performs
an alignment on all three individual alignments: Amptd Align Now, Burst
Align Now, and ChanEq Now). Refer to
page
209.
780, in
Chapter 31
System Settings. See also,
in lieu of the individual alignments
Now, and
ChanEQ Align
Burst Align
Now, and
System Settings.
"Preferences" on page
Align All
Amptd Align
Now. But, if you would prefer to have
"Preferences" on page
displayed on screen means the InstAlign
(to enable or disable the All Alignment) –
"Individual Alignments" on
All Alignment [Auto]
(Amptd Align
Now), because All Alignment [Auto] and
ChanEQ Align
Now. But, if you would prefer to
"Preferences" on page
780, in
Chapter 31
Now, because it
Now, as well as,
780, in
"Preferences" on
"Individual
Alignments".
or
Align
Now,
Burst
Amptd Align
780, in
System Settings.
209
Advertisement
Chapters
