Advertisement
Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
How to Use Data Logging (OTA Options 370, 372, 377, and 378)
To change Data Logging Configuration settings:
1. Press Trace 6 >
2. Then choose from the following:
Keysight N9915-90020 User's Guide
More
Data Logging
>
a. To set the
Record Settings
—
Meas Interval OFF ON
interval softkeys active (default = OFF).
—
Interval Type
— If applicable,
3.6 ks) or
— If applicable,
10 km)
b. To set the
Record Save/Recall
—
File Folder Default System
—
Default
—
System
system folder path/name:
Refer to
— Then
File Type
— KML (default) or
— CSV
— Then
Save Log
or
(Outdoor Mapping only)—choose:
Enable to make the measurement
Choose: Time or Distance
Time Interval
Enter time in seconds (1s to
Distance Interval
Enter time in miters (10m to
– Sets the default User Folder path:
——List files (*.csv and *.kml) are save-recalled
to:
"[CurrentDevice]:\RecordPlayback\
CS\"
——Data Log-Play files are save-recalled to:
"[CurrentDevice]:\RecordPlayback\
CS\"
Or
– Sets the User Folder to the user defined
——List files are save to-from
"CurrentDevice\<UserSelectedFolde
r>\"
——Data Log-Play files are save-recalled to:
"CurrentDevice\<UserSelectedFolde
r>\"
"File Management" on page
File.
817.
409
Advertisement
Chapters
