Advertisement
Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
— Over-the-Air (OTA) LTE TDD (Option 372)
— Over-the-Air (OTA) 5G TF (Option 377)
— Over-the-Air (OTA) 5G NR (Option 378)
Using a direct wired LAN connection with access to a network and the internet,
FieldFox will automatically access OSM once location coordinates (latitude and
longitude) and zoom levels are entered the Map Explorer menu. If using the
FieldFox Map Support Tool, OSM map files can be downloaded to a *.zip file
and imported to FieldFox internal memory. If the FieldFox GPS receiver is
enabled and OSM maps have been previously saved to FieldFox with those
GPS coordinates, FieldFox will automatically load the corresponding map to
match the GPS coordinates.
With Indoor Mapping:
Using the FieldFox:
— Import floor plans or site maps from picture files (PNG, JPG, BMP)
— Interactive Walk Test data collection with location pointer.
— Save Indoor Map files (kDAT)
— Indoor Map file Viewer with results presentation options
With RF Coverage Mapping:
Using the FieldFox:
— Begin with Data Logging recorded data results
— Overlay GPS-stamped located measured results onto maps on FieldFox
— LAN connection optional. GPS is required.
— Built-in Longitude, Latitude map search
— Save KML or CSV files
— Built-in Map Viewer with results presentation options
Using Google Earth or other software:
— View KML files
In this Chapter
"How to Install Node.js and Running the FieldFox Mapping Software" on
page 478
"Downloading and Using the FieldFox Map Support Tool" on page 480
474
Keysight N9915-90020 User's Guide
Advertisement
Chapters
