Keysight Technologies C Series User Manual page 662

Channel Scanner (Option 312)
How to Set Up Channel Scanner
Playing a Data Log and Viewing the Spectrogram
To play the log results:
Refer to
1. Press
2. Then choose:
3. Press
To pause the log play:
1. Optional: Press
2. Then choose:
3. Press
To View the spectrogram of recorded results:
1. Press
2. Then choose:
3. Press
660
Figure 28-13 on page
Data Logging > Play
— Optional: Use the RPG (fine adjust) or the arrow keys (coarse adjust)
to change the color bar.
See also, "How to Set Up Channel Scanner" on page
Stop or Esc to exit the log recording.
Pause Resume
— Optional: Use the RPG (fine adjust) or the arrow keys (coarse adjust)
to change the color bar.
— Cursor Position
record's results (i.e., Cursor Position is active only when
playback is paused).
— Maps Red/Blue Limits
>
——Red Limit
——Blue Limit
Stop or Esc to stop the log recording.
View
(Applies to Option 312 Only)
— Zoom to zoom in on spectrogram time record results.
— Red Limit
to change the color bar.
— Blue Limit to change the color bar.
Exit or Esc to exit view.
661.
to pause or resume the log recording.
to change the position along the time
then
to change the color bar.
to change the color bar.
Keysight N9915-90020 User's Guide
647.