Advertisement
IQ Analyzer (IQA) – Option 351
I/Q Analyzer (IQA) Mode Settings
Preamplifier Control (Opt 235)
When very low-level signals are analyzed, an internal preamplifier can be used
to boost the signal level by approximately 18 to 22 dB. The gain of the preamp
is NOT adjustable. The displayed signal level is automatically adjusted for the
increase in system gain.
How to control the Preamp
By default, the preamp is OFF.
— Press Scale/Amptd.
— Then
— Then
Keysight N9915-90020 User's Guide
More
Preamp Off
The displayed setting is the current setting. When ON,
is shown to the left of the graticules on the display (default: OFF). When
OFF, nothing is displayed in the left graticules.
When Auto is selected, the preamp setting is determined by the RF
attenuation and to the input power level. When the input power level
reaches a certain value, the preamp is turned on and
of the graticules on the display.
PA
PA
is shown to the left
313
Advertisement
Chapters
