Keysight Technologies C Series User Manual page 691

Noise Figure Mode (Option 356)
How to Define a Noise Figure Measurement
Keysight N9915-90020 User's Guide
IMPORTANT! The FieldFox displays Replace existing file?, because
the displayed default filename is the one last saved. Enter a unique
filename to avoid loss of table data.
— Back
— Preamp
Table.
Then choose:
— Uncert Contributions
contribution softkeys.
Then choose:
——New DUT Table
Opens a menu of softkeys to
choose a new DUT table.
——Save DUT Table Opens a Create a filename menu
of softkeys to enter a DUT table filename and
then to save the file.
——Recall DUT Table Opens a Select a file menu of
softkeys to enter a DUT table filename to recall.
——Storage Device [Internal]
to select where your DUT table is saved.
Then choose Internal,
to return to previous menu.
Sets the DUT Mode to either Spot (default) or
——Preamp Mode Set to Spot (default) or to Table.
For Preamp MODE Spot choose:
——Preamp Spot Values
Mode = Spot).
Refer to similar "DUT Spot Values (Only active
when DUT Mode = Spot)." on page
——Back to return to previous menu.
——Preamp Table Edit/Save/Recall
when Preamp Mode = Table).
Refer to similar "DUT Table Edit/Save/Recall
(Only active when DUT Mode = Table)." on
page 688.
——Back
to return to previous menu.
Opens a menu of uncertainty
Opens a set of softkeys
SD Card, or USB.
(Only active when DUT
688.
(Only active
689