Keysight Technologies C Series User Manual page 452

5G Rapid Prototype Phased Array Antenna – Option 360
How to Set Up Phased Array Antenna Settings
Three file types are supported for save or recall log results:
2. Press
3. Outdoor Mapping: Press
452
— DCREC (Option 360 only)
KML file format
—
——Files stored in this format can be imported into 3rd
party applications like Google Earth or Google Maps.
— CSV file format. Files stored into this format can be imported into
spreadsheet applications.
DREC file format. This file type is a binary file. File contains
—
recorded state and trace data, with GPS time and locations
stamps if enabled. Available with Option 360 only.
— Then Save Log
or
— Then Recall Log File.
— Auto Save (default = OFF)
— Then Back
c. Optional: Press Indoor Map Data Logging
— Record Indoor Data
refer to "How to Use Data Logging/Playback (Option 360)" on
page 454, Chapter 16
Setup Procedure" on page
— Then choose from
Pan, Record
— Learn more, refer to
Data Logging" on page
Back
to return to previous menu.
Record
— Pause Resume Temporarily halts recording until pressed again. The
incoming trace continues to sweep. Press again to continue
recording.
— Stop
Immediately stops recording and a "Save the Log File" menu
opens to rename and save your data log file.
— (Press Record
to begin a new recording.)
— Then Maps To enable map view and related features (e.g., Data
Selection, Red/Blue Limits, Labels & Icons, Zoom).
— View Map OFF ON
File.
or Recall Indoor Log
Mapping and
491.
Navigate OFF ON,
Data, More
Chapter 16 Mapping and
503.
to begin a new recording and then
Displays the current GPS location.
Keysight N9915-90020 User's Guide
then
File. Learn more,
"Option 352 Indoor Maps
Data Selection, Zoom,
"Setting up