Using The Rmu Configuration Pages; Configuring The Device - ADIC FastStor 2 User Manual

Label
Number of load-unload cycles
Operation time
Current drive status
Current drive activity
Current robotic action
Barcode reader enabled
The following pieces of information are displayed for the media:
Label
Slot number
Status
In drive
Barcode
Write-protected

Using the RMU Configuration Pages

The Configuration pages of the RMU interface present device specific
CAUTION:
settings to be selected or specified. Changes take effect only after a
device reset.
Only administrators and service personnel have access to the RMU Configuration page. The following
parameters can be set by means of the Configuration page:
• Device
• Network
• User
• Real Time Clock
• Log
• Event Notification
• Reset
The RMU Configuration page functionality is not the same as the functionality
NOTE:
available by means of the operator panel Configuration menu. Refer to
Understanding the Menu Structure

Configuring the Device

The following parameters can be configured for the device:
FastStor 2 User's Guide
Description
Number of load and unload cycles
Time since first start.
Current status of the drive
Current activity of the drive
Number of retries
Yes or No
Description
The home slot number, 1-8
Good, Warning, or Error
The drive number, if any.
The barcode number
Yes or No
on page 13.
33