H3C S6812 Series Command Reference Manual page 931

Table 4 Command output
Field
Interface
Pool
Using pool
Preference value
Allow-hint
Rapid-commit
display ipv6 dhcp server conflict
Use display ipv6 dhcp server conflict to display information about IPv6 address conflicts.
Syntax
display ipv6 dhcp server conflict [ address ipv6-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
address ipv6-address: Displays conflict information for the specified IPv6 address. If you do not
specify an IPv6 address, this command displays information about all IPv6 address conflicts.
Usage guidelines
The DHCPv6 server creates IP address conflict information in the following conditions:
•
The DHCPv6 client sends a DECLINE packet to the DHCPv6 server to inform the server of an
IPv6 address conflict.
•
The DHCPv6 server discovers that the only assignable address in the address pool is its own
IPv6 address.
Examples
# Display information about all address conflicts.
<Sysname> display ipv6 dhcp server conflict
IPv6 address
2001::1
1::1:2
Description
Interface enabled with DHCPv6 server.
Address pool applied to the interface.
If no address pool is applied to the interface, global is displayed. The
DHCPv6 server selects a global address pool to assign a prefix, an
address, and other configuration parameters to a client.
Address pool applied to the interface.
If no address pool is applied to the interface, global is displayed. The
DHCPv6 server selects a global address pool to assign a prefix, an
address, and other configuration parameters to a client.
Server preference in the DHCPv6 Advertise message. The value
range is 0 to 255. The bigger the value is, the higher preference the
server has.
Indicates whether desired address/prefix assignment is enabled.
Indicates whether rapid address/prefix assignment is enabled.
Detect time
Apr 25 16:57:20 2007
Apr 25 17:00:10 2007
13