H3C S6812 Series Command Reference Manual page 901

Examples
# Set the router lifetime in RA messages on VLAN-interface 100 to 1000 seconds.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd ra router-lifetime 1000
Related commands
ipv6 nd ra interval
ipv6 nd router-preference
Use ipv6 nd router-preference to set a router preference in RA messages.
Use undo ipv6 nd router-preference to restore the default.
Syntax
ipv6 nd router-preference { high | low | medium }
undo ipv6 nd router-preference
Default
The router preference is medium.
Views
Interface view
Predefined user roles
network-admin
Parameters
high: Sets the router preference to the highest setting.
low: Sets the router preference to the lowest setting.
medium: Sets the router preference to the medium setting.
Usage guidelines
A hosts selects a router with the highest preference as the default router.
When router preferences are the same in RA messages, a host selects the router corresponding to
the first received RA message as the default gateway.
Examples
# Set the router preference in RA messages to the highest on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd router-preference high
ipv6 nd snooping enable global
Use ipv6 nd snooping enable global to enable ND snooping for global unicast addresses.
Use undo ipv6 nd snooping enable global to disable ND snooping for global unicast addresses.
Syntax
ipv6 nd snooping enable global
undo ipv6 nd snooping enable global
47