Table of Contents
Advertisement
Removing and Replacing a Power
Sequencer
1. Loosen captive screws on the front of the power sequencer.
2. Pull the power sequencer part of the way out of the rack.
3. Disconnect three cables from the rear panel of the power sequencer.
4. Pull the power sequencer free from the cables and out of the rack.
Removing a Power Sequencer
FIGURE 1-3
To replace a power sequencer, reverse the steps of the power sequencer removal
procedure.
Chapter 1 Sun Rack Service
5
Advertisement
Table of Contents
Need help?
Do you have a question about the Rack and is the answer not in the manual?
Questions and answers