Renesas R-IN32M3 Series User Manual page 239

R-IN32M3-EC User's Manual
Rev. Date
2.01 Apr. 18,2014
3.00 Jun. 30,2014
3.01 Dec. 25,2014
4.00 Jan. 22, 2016
Page
Overall Modification of CC-Link Signals (Remote device station)
60 Modification of the contents of ACKNOWLEDGE bit of 7.4.5 Register 5 -
Auto-Negotiation Link Partner Ability (Base Page) Register
22 Modification of attribution of FB of 2.1.16 System Signals
30 Modification of the end address of EtherCAT area of Fig.3.1 Memory Map
(ALL)
33 Modification of the end address of EtherCAT area of Fig.3.5 External MPU
interface area
40-125 Modification of 6 EtherCAT Slave Controller function
3 Change status for Intelligent device station for CC-Link in 1.3 Overview
196 Remove IOLP521, IOLP520 bit at 8.5.4 Port 5 buffer function change
registers (DRCTLP5L, DRCTLP5H) (because driving capability of P52 is fixed
to 6mA.)
6-25 2. Pin Functions
Meaning of the items, symbols, and abbreviations, added to the list of pins
Description unified
10 2.1.3 External Memory Interface Pins
• The value of BUSCLK during reset and after reset, modified
• Supplemental explanations added to Note 1
18 2.1.11 Trace Pins
The value of TRACECLK during reset and after reset, modified
20 2.1.14 CC-Link Pins (Intelligent Device Station)
Functional description on CCM_CLK80M, modified
21 2.1.15 CC-Link Pins (Remote Device Station)
Note added to CCM_CLK80M
22 2.1.16 System Pins
• Functional description and active level of XT1/XT2/OSCTH/JTAGSEL,
modified
• The value of RSTOUTZ during reset and after reset, modified
24, 25 2.1.18 Operating Mode Setting Pins
• Functional description of the ADMUXMODE pin, modified
• The list of the combinations of available operating mode setting pins, added
26-35 2.2 Pin States
The initial states for all boot modes and all port pins, added
37 2.3.4 System Pins
• Recommended connection when not using XT1/XT2, modified
Note added
• Recommended connection when not using OSCTH/JTAGSEL, modified
39 2.3.7 Operation Mode Setting Pins
Recommended connection when not in use, modified
40 Figure 3.1 Memory Map (ALL)
Instruction RAM area and instruction RAM mirror area, modified
43 Figure 3.5 External MCU Interface Area
Instruction RAM mirror area, modified
Description
Summary
REVISION HISTORY
REVISION-2