R-IN32M3-EC User's Manual
Bit Position
Bit Name
4
PHYP0
2
ENHLINKD
1
PDIWDST
0
PDIOPE
Note: Reading this register from ECAT clears bit 2 in the ECAT event request register
(ECAT_EVENT_REQ: 0x0210).
R18UZ0003EJ0501
Jan. 12, 2021
Physical Link on Port 0
0: No link
1: Link detected
Enhanced Link Detection
0: Deactivated for all ports
1: Activated for at least one port
Note: The value of bit 9 at 0x0000 in the EEPROM is set. The EEPROM value is only taken
over at first EEPROM load after power-on or reset.
PDI Watchdog Status
0: The watchdog is expired
1: The watchdog is reloaded
PDI Operation/EEPROM Loaded State
0: EEPROM is not loaded, and PDI is not operational (no access to the process data RAM)
1: EEPROM is loaded correctly, and PDI is operational (access to the process data RAM)
6. EtherCAT Slave Controller Function
Description
Page 79 of 224