Adding Or Replacing Paper; Setting Up The Paper Receiving Tray - Riso CZ180 User Manual

Basic Operations

Adding or Replacing Paper

When you add paper or replace with paper of a different size at the time of printing, press
to lower the Paper Feed Tray.
When the tray runs out of paper or you remove all paper, the tray is automatically lowered to the bottom.
Important!:
• Do not mix paper of different sizes.
• After replacing with paper of a different size, reposition the Receiving Tray Paper Guides and the Paper Receiving
Tray according to the size of the replacement paper.
• When you replace with the paper of a different quality, adjust the position of Paper Feed Pressure Adjustment
Lever and the Paper Stripping Pressure Adjustment Knob.

Setting up the Paper Receiving Tray

1
Pull out the Paper Receiving Tray
according to the print paper length.
Position the Paper Receiving Tray to the scale of
paper size.
22 Preparing to Print
2
Position the Receiving Tray Paper
Guides.
Raise the Receiving Tray Paper Guides, hold their
lower parts, and then slide them according to the
scale on the Paper Receiving Tray.
key on the Control Panel