Replacing an Assembly
The following steps show the sequence to replace an assembly in the analyzer.
1. Identify the faulty group. Refer to
with the appropriate troubleshooting chapter that identifies the faulty assembly.
2. Order a replacement assembly. Refer to the information in this chapter.
3. Replace the faulty assembly and determine what adjustments are necessary. Refer to
Chapter 14 , "Assembly Replacement and Post-Repair Procedures."
4. Perform the necessary adjustments. Refer to
Constants."
5. Perform the necessary performance tests. Refer to
Chapter 13
Chapter 4 , "Start Troubleshooting Here."
Chapter 3 , "Adjustments and Correction
Chapter 2 , "Performance Tests."
Replaceable Parts
Replacing an Assembly
Follow up
13-3