Digital Control - Agilent Technologies 8753ES Option 011 Service Manual

Start Troubleshooting Here

Digital Control

Digital Control
Observe the Power Up Sequence
Switch the analyzer power off, then on. The following should take place within a few
seconds:
• On the front panel, observe the following:
1. All six amber LEDs illuminate.
2. The amber LEDs go off after a few seconds, except the CH1 LED. See
• The display should come up bright with no irregularity in colors.
• After an initial pattern, five red LEDs on the A9 CPU board should remain off. They can
be observed through a small opening in the rear panel.
If the power up sequence does not occur as described, or if there are problems using the
front panel keyboard, refer to
Figure 4-5 Front Panel Power Up Sequence
4-12
Chapter 6 , "Digital Control Troubleshooting."
Figure 4-5.
Chapter 4