Figure 2-10
Magnitude Frequency Response Test Setup (Receiver Input A)
9. Press
Meas
A
10.Press
CW FREQ
11.Write the marker reading in the "A Input Power" column on the performance test
record.
12.Repeat steps 10 and 11 for the other CW frequencies listed on the performance test
record.
Input B Magnitude Frequency Response
13.Reconfigure the equipment as shown in
Figure 2-11
Magnitude Frequency Response Test Setup (Receiver Input B)
Chapter 2
to measure the power at the receiver input A channel.
Sweep Setup
.
300
k/m
7. Receiver Magnitude Frequency Response
Figure
2-11.
Performance Tests
2-25