Agilent Technologies 8753ES Option 011 Service Manual page 296

Service Key Menus and Error Messages
Service Key Menus
Test Options Menu
To access this menu, press
Table 10-3 Test Options Menu Keys
Key
TEST OPTIONS
CONTINUE TEST
REPEAT on OFF
RECORD on OFF
LIMITS [NORM/SPCL]
PWR LOSS on OFF
LOSS/SENSR LISTS
DUMP GRAPH
10-6
SERVICE MENU
System
GPIB
Mnemonic
N/A Accesses softkeys that affect the way tests (routines) run, or
supply necessary additional data.
Resumes the test from where it was stopped.
TESR1
Toggles the repeat function on and off. When the function is
TO2
ON, the selected test will run 10,000 times unless you press
any key to stop it. The analyzer shows the current number of
passes and fails.
Toggles the record function on and off. When the function is
TO1
on, certain test results are sent to a printer via GPIB. This is
especially useful for correction constants. The instrument
must be in system controller mode or pass control mode to
print (refer to your analyzer's user's guide for more
information on printing).
N/A Selects either NORMal or SPeCiaL (tighter) limits for the
operator's check. The SPCL limits are useful for a guard
band.
Selects whether or not to use the power loss table for a power
PWRLOSS
meter calibration.
N/A Accesses the power loss/sensor lists menu that contains the
following softkeys:
USE SENSOR A/B
B power sensor calibration factor list for use in power
meter calibration measurements.
CAL FACTOR SENSOR A
Edit List menu to allow modification of the calibration
data table for power sensor A.
CAL FACTOR SENSOR B
Edit List menu to allow modification of the calibration
data table for power sensor B.
POWER LOSS
menu to allow modification of the external power loss
data table that corrects coupled-arm power loss when a
directional coupler samples the RF output.
N/A Generates printed graphs of verification results when
activated during a system verification.
.
TEST OPTIONS
Description
(USESENS<A|B>) selects the A or
(CALFSENA) accesses the
(CALFSENB) accesses the
(POWLLIST) accesses the Edit List
Chapter 10