4. Press
to access the input R and B operator's check. When the title appears,
22
x1
press
EXECUTE TEST
prompted, until the analyzer displays "PASS" or "FAIL."
If the Operator's Check Failed
• Recheck the equipment configuration and connections; if necessary, retest.
• Confirm that the attenuator, splitter and cables meet their published specifications.
Visually inspect the connectors. Retest or refer to
page
4-10.
Chapter 4
. Move the RF cable from input A to B. Press
Start Troubleshooting Here
Step 2. Operator's Check
CONTINUE
"Step 4. Faulty Group Isolation" on
, as
4-7