Accessories Troubleshooting Accessories Troubleshooting - Agilent Technologies 8753ES Option 011 Service Manual

Network analyzer

Hide thumbs Also See for 8753ES Option 011:

Table of Contents

Accessories Troubleshooting

Use this procedure only if you have read

the procedures in the order given, unless instructed otherwise.

Measurement failures can be divided into two categories:

• Failures which don't affect the normal functioning of the analyzer but render incorrect

measurement data.

• Failures which impede the normal functioning of the analyzer or prohibit the use of a

This chapter addresses the first category of failures which are usually caused by the

• operator errors

• faulty calibration devices or connectors

• bad cables or adapters

• improper calibration techniques

• RF cabling problems within the test set.

These failures are checked using the following procedures:

"Inspect the Accessories" on page 9-4

"Inspect the Error Terms" on page 9-5

"Test Set Troubleshooting" on page 9-8

Chapter 4 , "Start Troubleshooting Here."

Troubleshooting