Required Tools And Equipment - Agilent Technologies 8753ES Option 011 Service Manual

Network analyzer

Hide thumbs Also See for 8753ES Option 011:

Table of Contents

Service Equipment and Analyzer Options

Required Tools and Equipment

The following is a list of the tools required to service your analyzer:

• T-8, T-10, T-15, T-20, and T-25 TORX screwdrivers

• Flat-blade screwdrivers — small, medium, and large

• 5/16-inch open-end wrench (for SMA nuts)

• 2-mm extended bit Allen wrench

• 3/16, 5/16, and 9/16-inch hex nut drivers

• 5/16-inch open-end torque wrench (set to 10 in-lb)

• 2.5-mm hex-key driver

• Non-conductive and non-ferrous adjustment tool

• Needle-nose pliers

• Antistatic work mat with wrist-strap