Minimum Equipment Required - Agilent Technologies E5900B User Manual

Minimum equipment required

The following equipment is required to use the emulation probe:
• A method for connecting the emulation probe to the target system. The
target system must have an appropriate JTAG or BDM debug port
connector. If your target system does not have a debug port connector,
you may be able to use the debug port connector which is built into some
analysis probes. The target system must meet the criteria on page 49.
• A host computer, such as a PC or workstation. You can also connect the
emulation probe to an Agilent 16700-series logic analysis system.
• A LAN (local area network) to connect the emulation probe to the host
computer or logic analysis system.
• A user interface on the host computer, such as a high-level source
debugger or the logic analysis system's Emulation Control Interface.
E5900B / E5901B User's Guide Supplement
Overview
Agilent E5900B Emulation Probe
15