Packing Ex8200 Switch Components For Shipping - Juniper EX8208 Hardware Manual

Figure 117: Packing an EX8200 Switch

Packing EX8200 Switch Components for Shipping

To pack EX8200 switch components, follow the instructions here. For instructions to pack line cards, see
"Packing a Line Card Used in an EX8200 Switch" on page
Before you begin packing a switch component, ensure that you have the following parts and tools available:
Antistatic bag, one for each component
Electrostatic discharge (ESD) grounding strap
CAUTION:
boxes if they do not fit together on one level in the shipping box.
To pack EX8200 switch components:
Place individual components in antistatic bags.
Use the original packing materials if they are available. If the original packing materials are not available,
ensure the component is adequately packed to prevent damage during transit. The packing material you
use must be able to support the weight of the component.
Do not stack switch components. Return individual components in separate
344.
343