Lcd Panel Menus - Juniper EX8208 Hardware Manual

LCD Panel Menus

The LCD panel has three menus: Idle, Status, and Maintenance. In each of these menus, line one of the
LCD panel displays the hostname of the switch. Toggle between the LCD menus by pressing the Menu
button. Navigate through the menu options by pressing the Enter button.
Table 13 on page 45 describes the LCD panel menu options.
Table 13: LCD Panel Menu Options for the EX8200 Switch
Menu Description
Idle In the Idle menu:
Press Enter to cycle through the Status LED modes, which are port status indicators:
ADM (enabled/disabled)
SPD (speed)
DPX (duplex)
POE (Power over Ethernet)
See Network Port LEDs in an EX8200 Switch for information on the Status LED.
Press Menu to exit the Idle menu and go to the Status menu.
45