Juniper EX8208 Hardware Manual page 179

Figure 53: Connecting the Power Supply Cables to an EX8200 Switch
8. Install the plastic cable cover over each set of power cables, using the number 2 Phillips (+) screwdriver
to tighten the screw (see
Figure 54: Installing the Plastic Cable Cover on a DC Power Supply in an EX8200 Switch
9. Ensure that the power supply is fully inserted and latched securely in the chassis. See
Power Supply in an EX8200 Switch" on page
10. Repeat Steps 2 through
Figure 54 on page 179).
245.
9 for the remaining power supplies.
179
"Installing a DC