Line Card Model And Version Compatibility In An Ex8200 Switch - Juniper EX8208 Hardware Manual

Line Card Model and Version Compatibility in an EX8200 Switch

Twelve line cards are available for EX8200 switches. The extra-scale line card models, identified by the
letters ES at the end of the model names, provide larger IPv4 and IPv6 route table than the non-extra-scale
models to store more unicast routes.
Table 36 on page 84 shows the model numbers, names of the line cards, the Junos OS release in which
the models were released, the release in which support on EX8200 Virtual Chassis was introduced, and
the release in which Virtual Chassis port (VCP) support was introduced for ports on the line card.
Table 36: Line Card Models by Junos OS Release
Model Number Name
EX8200-8XS 8-port SFP+ line card
EX8200-8XS-ES 8-port SFP+ line card, extra-scale
EX8200-40XS 40-port SFP+ line card
EX8200-40XS-ES 40-port SFP+ line card, extra-scale
EX8200-2XS-40P 40-port PoE+ with 4-port SFP and 2-port
SFP+ line card
EX8200-2XS-40T 40-port RJ-45 with 4-port SFP and 2-port
SFP+ line card
EX8200-48PL 48-port PoE+ 20 Gbps line card
EX8200-48TL 48-port RJ-45 20 Gbps line card
EX8200-48T 48-port RJ-45 line card
EX8200-48T-ES 48-port RJ-45 line card, extra-scale
EX8200-48F 48-port SFP line card
Support on
First EX8200
Junos OS Virtual
Release Chassis
9.4R1 10.4R1
11.1R1 11.4R1
10.3R1 11.1R1
11.4R1 11.4R1
11.2R1 11.4R1
11.2R1 11.4R1
11.2R1 11.4R1
11.2R1 11.4R1
9.4R1 10.4R1
11.1R1 11.4R1
9.4R1 10.4R1
84
EX8200 Virtual
Chassis Port
(VCP) Support
10.4R1
11.4R1
Not supported
Not supported
11.4R1
NOTE: VCPs
supported on SFP+
transceivers only
11.4R1
NOTE: VCPs
supported on SFP+
transceivers only
Not supported
Not supported
Not supported
Not supported
Not supported