Juniper EX8208 Hardware Manual page 210

Table 73: System Information (continued)
Field Description
Indicates the following:
For EX3200 switches; and for EX2200, EX2200-C,
EX3300, EX4200, EX4300, EX4500, EX4550, and
EX4600 switches that are not configured as Virtual
Chassis, the value displayed in Inventory details field is
always 1 FPC. FPC is a legacy term for a slot in a large
Juniper Networks chassis; which simply refers to the
standalone switch.
For EX2200 and EX2200-C switches configured as a
Virtual Chassis, the value displayed in the Inventory
details field is 1–4 FPC, with the number corresponding
to the number of member switches.
For EX3300 switches configured as a Virtual Chassis,
the value displayed in the Inventory details field is 1–6
FPC, with the number corresponding to the number of
member switches.
NOTE: For Junos OS Release 14.1X53-D10 and later,
EX3300 switches configured as a Virtual Chassis display
the value 1–10 FPC in the Inventory details field.
For EX4200, EX4500, EX4550, and EX4600 switches
configured as a Virtual Chassis, the value displayed in
the Inventory details field is 1–10 FPC, with the number
corresponding to the number of member switches.
For EX4650 switches, the value displayed in Inventory
details field is equal to the number of FPCs.
For EX6210 switches, the values displayed in the
Inventory details field are 1–2 CB and 1–9 FPC. CB, or
Control Board, refers to the SRE module. FPC refers to
line cards and the FPC within the CB.
For an EX8208 switch, the values displayed in Inventory
details field are 1–3 CB and 0–8 FPC. CB, or Control
Board, refers to SRE and SF modules. FPC refers to line
cards.
For EX8216 switches, the values displayed in Inventory
details field are 1–2 CB and 0–16 FPC. CB, or Control
Board, refers to RE modules and FPC refers to line cards.
For an XRE200 External Routing Engine in an EX8200
Virtual Chassis, the value displayed in Inventory details
is 1 XRE. XRE refers to RE modules. For XRE200
210