Juniper EX8208 Hardware Manual page 309

Table 89: Chassis Alarms for EX8200 Switches (continued)
Component Alarm Condition
Upgrade bank is
empty or corrupted.
Firmware version is
not the latest.
Single-bit ECC error
detected.
Console device
encounters framing
error storm.
Severity Remedy
Major (red) Open a support case
using the Case Manager
link at
https://www.juniper.net/support/
or call 1-888-314-5822
(toll-free within the
United States and
Canada) or
1-408-745-9500 (from
outside the United
States).
Minor Open a support case
(yellow) using the Case Manager
link at
https://www.juniper.net/support/
or call 1-888-314-5822
(toll-free within the
United States and
Canada) or
1-408-745-9500 (from
outside the United
States).
Major (red) Open a support case
using the Case Manager
link at
https://www.juniper.net/support/
or call 1-888-314-5822
(toll-free within the
United States and
Canada) or
1-408-745-9500 (from
outside the United
States).
Not Check for faulty console
applicable cable.
Additional
Information
309