Environmental Requirements and Specifications for EX Series Switches
The switch must be installed in a rack or cabinet housed in a dry, clean, well-ventilated, and
temperature-controlled environment.
Ensure that these environmental guidelines are followed:
The site must be as dust-free as possible, because dust can clog air intake vents and filters, reducing the
efficiency of the switch cooling system.
Maintain ambient airflow for normal switch operation. If the airflow is blocked or restricted, or if the
intake air is too warm, the switch might overheat, leading to the switch temperature monitor shutting
down the switch to protect the hardware components.
Table 53 on page 110
provides the required environmental conditions for normal switch operation.
Table 53: EX Series Switch Environmental Tolerances
Environment Tolerance
meters)
Temperature
Normal operation ensured
Normal operation ensured
(noncondensing)
F (40° C) at altitudes up to
5,000 ft (1,524 m).
For information about
extended temperature SFP
transceivers supported on
EX2200 switches, see
Pluggable Transceivers
Supported on EX2200
Switches.
110
Seismic
Complies with Zone
4 earthquake
requirements as per
GR-63, Issue 4.