Chassis Component Alarm Conditions On Ex8200 Switches - Juniper EX8208 Hardware Manual

Table 88: Alarm Terms (continued)
Term
system alarm
Alarm Types
The switch supports these alarms:
Chassis alarms indicate a failure on the switch or one of its components. Chassis alarms are preset and
cannot be modified.
System alarms indicate a missing rescue configuration. System alarms are preset and cannot be modified,
although you can configure them to appear automatically in the J-Web interface display or the CLI
display.
Alarm Severity Levels
Alarms on switches have two severity levels:
Major (red)—Indicates a critical situation on the switch that has resulted from one of the following
conditions. A red alarm condition requires immediate action.
One or more hardware components have failed.
One or more hardware components have exceeded temperature thresholds.
An alarm condition configured on an interface has triggered a critical warning.
Minor (yellow or amber)—Indicates a noncritical condition on the switch that, if left unchecked, might
cause an interruption in service or degradation in performance. A yellow or amber alarm condition
requires monitoring or maintenance.
A missing rescue configuration generates a yellow or amber system alarm.
SEE ALSO
Dashboard for EX Series Switches | 205

Chassis Component Alarm Conditions on EX8200 Switches

Purpose
Definition
Preset alarm triggered by a missing rescue configuration or failure to install a license for
a licensed software feature.
NOTE: On EX6200 switches, a system alarm can be triggered by an internal link error.
300