Juniper EX8208 Hardware Manual page 36

Table 8: FRUs in an EX8208 Switch (continued)
FRU
Switch Fabric (SF) module
Line cards
SFP and SFP+ transceivers
See "Pluggable Transceivers Supported on EX8200
Switches" on page 128 for the Junos OS release in which the
transceivers were introduced.
NOTE: Line cards are not part of the base or redundant configuration. You must order them
separately.
NOTE: If you have a Juniper J-Care service contract, register any addition, change, or upgrade
of hardware components at
https://www.juniper.net/customers/support/tools/updateinstallbase/
result in significant delays if you need replacement parts. This note does not apply if you replace
existing components with the same type of component.
SEE ALSO
Line Card Model and Version Compatibility in an EX8200 Switch | 84
Type
Redundant configuration:
SF module is hot-insertable and hot-removable.
Base configuration:
We recommend that you disable the switch before
removing the SF module. See
Offline in an EX8208 Switch" on page
See "EX8208 Switch Configurations" on page
Hot-insertable and hot-removable. We recommend that
you take the line cards offline before removing them.
See "Removing a Line Card from an EX8200 Switch" on
page 268.
Hot-insertable and hot-removable.
. Failure to do so can
"Taking the SF Module
257.
27.
36