Juniper EX8208 Hardware Manual page 217

Table 82 on page 225—Describes the chassis viewer for EX4600 switches.
Table 83 on page 226—Describes the chassis viewer for EX4650 switches.
Table 84 on page 227—Describes the chassis viewer for EX6210 switches.
Table 85 on page 228—Describes the chassis viewer for EX8208 switches.
Table 86 on page 229—Describes the chassis viewer for EX8216 switches.
Table 87 on page 231—Describes the chassis viewer for the XRE200 External Routing Engines.
Table 76: Chassis Viewer for EX2200 Switches
Field
Front View
Interface status
Rear View
Management (me0) port
Console port
USB port
Fan tray
Power supply
Table 77: Chassis Viewer for EX2200-C Switches
Field
Front View
Description
In the image, the following colors denote the interface status:
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
Mouse over the interface (port) to view more information.
The management port is used to connect the switch to a management device for
out-of-band management.
The console port is used to connect the switch to a management console or to a console
server. (You might do this for initial switch configuration.)
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks
for your EX Series switch.
Mouse over the fan tray icon to display name, status, and description information.
Mouse over the power outlet icon to display name, status, and description information.
Description
217