Disabling Or Enabling Menus And Menu Options On The Lcd Panel - Juniper EX8208 Hardware Manual

The LCD panel on the front panel of EX Series switches displays a variety of information about the switch
in the Status menu and provides the Maintenance menu to enable you to perform basic operations such
as initial setup and reboot. You can disable these menus or individual menu options if you do not want
switch users to use them. You can also set a custom message that will be displayed on the panel.

Disabling or Enabling Menus and Menu Options on the LCD Panel | 203

Configuring a Custom Display Message | 204
Disabling or Enabling Menus and Menu Options on the LCD Panel
By default, the Maintenance menu, the Status menu, and the options in those menus in the LCD panel are
enabled. Users can configure and troubleshoot the switch by using the Maintenance menu and view certain
details about the switch by using the Status menu.
If you do not want users to be able to use those menus or some of the menu options, you can disable the
menus or individual menu options. You can reenable the menus or menu options.
Issue the show chassis lcd menu operational mode command to see the menus or menu options that are
currently enabled.
NOTE: On some platforms, you must specify an FPC slot number in these commands. See the
lcd-menu statement for details.
To disable a menu:
[edit]
user@switch# set chassis lcd-menu menu-item menu-name disable
To enable a menu:
[edit]
user@switch# delete chassis lcd-menu menu-item menu-name disable
To disable a menu option:
[edit]
user@switch# set chassis lcd-menu menu-item menu-option disable
203