Juniper EX8208 Hardware Manual page 270

6. Grasp the ejector levers on the faceplate of the line card and pull them outward simultaneously until
they are in the open position and the line card is fully unseated. The closed and the open positions of
the 2-in.-long ejector levers (see
of the 4-in.-long ones.
Figure 83: Closed and Open Positions of the 2-in. Ejector Lever
Closed
Line card
Ejector lever
7. Grasp the ejector levers and gently slide the line card halfway out of the chassis (see
Figure 84 on page 270
Figure 84: Removing a Line Card with a 2-in. Ejector Lever
Captive
screw
EX8 200- 40X S
Ejector
levers
Figure 85: Removing a Line Card with a 4-in. Ejector Lever
Figure 83 on page
Open
and Figure 85 on page 270).
270) are not as markedly distinguishable as those
270