Register Products-Mandatory To Validate Slas; Installing And Connecting An Ex8208 Switch - Juniper EX8208 Hardware Manual

NOTE: You must provide mounting screws that are appropriate for your rack or cabinet to
front-mount the chassis on a rack or a cabinet.
For two-post rack installation, you need 28 screws: 24 screws to attach the front-mounting
bracket "ears" that come installed on the chassis to the front of the rack and 4 screws to install
the power cord tray. (The power cord tray is mandatory for two-post rack installation.)
For four-post rack installation, you need either 40 or 44 screws: 24 screws to attach the
front-mounting bracket "ears" that come installed on the chassis to the front of the rack, 16
screws to attach the adjustable mounting brackets to the rack, and 4 screws if you install the
optional power cord tray.
Register Products—Mandatory to Validate SLAs
Register all new Juniper Networks hardware products and changes to an existing installed product using
the Juniper Networks website to activate your hardware replacement service-level agreements (SLAs).
CAUTION:
update the installation base data if there is any addition or change to the installation
base or if the installation base is moved. Juniper Networks will not be held accountable
for not meeting the hardware replacement service-level agreement for products that
do not have registered serial numbers or accurate installation base data.
Register your product(s) at https://tools.juniper.net/svcreg/SRegSerialNum.jsp.
Update your installation base at
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp.

Installing and Connecting an EX8208 Switch

The EX8208 switch chassis is a rigid sheet-metal structure that houses the other hardware components
such as Switch Fabric and Routing Engine (SRE) modules, a Switch Fabric (SF) module, and line cards. The
switch ships in a cardbox box that has a two-layer wooden pallet base. The switch chassis is bolted to the
pallet base.
To unpack an EX8208 switch, follow instructions in Unpacking an EX8200 Switch.
Register product serial numbers on the Juniper Networks website and
147