Ex8200 Power System; Ac Power Supply In An Ex8200 Switch - Juniper EX8208 Hardware Manual

You cannot replace a single fan. If one or more fans fail, you must replace the entire fan tray.
WARNING:
of moving fan blades when you are removing the fan tray.
RELATED DOCUMENTATION
Clearance Requirements for Airflow and Hardware Maintenance for an EX8208 Switch | 116

EX8200 Power System

IN THIS SECTION

AC Power Supply in an EX8200 Switch | 56

AC Power Supply LEDs in an EX8200 Switch | 63
AC Power Specifications for EX8200 Switches | 65
AC Power Cord Specifications for an EX8200 Switch | 66
DC Power Supply in an EX8200 Switch | 70
DC Power Supply LEDs in an EX8200 Switch | 72
DC Power Specifications for EX8200 Switches | 75
Grounding Cable and Lug Specifications for EX8200 Switches | 76
AC Power Supply in an EX8200 Switch
IN THIS SECTION
AC Power Supply Description | 57
N+1 Redundancy Configuration of AC Power Supplies | 59
N+N Redundancy Configuration of AC Power Supplies | 60
There is no fan guard on the fans. Be careful to keep your fingers clear
56