Connecting And Configuring An Ex Series Switch (Cli Procedure) - Juniper EX8208 Hardware Manual

}
}
commit {
factory-settings {
reset-chassis-lcd-menu;
}
}
}
protocols {
igmp-snooping {
vlan all;
}
rstp;
lldp {
interface all;
}
lldp-med {
interface all;
}
}
ethernet-switching-options {
storm-control {
interface all;
}
}
poe {
interface all;
}
SEE ALSO
Configuration Files Terms

Connecting and Configuring an EX Series Switch (CLI Procedure)

There are two ways to connect and configure an EX Series switch: one method is through the console by
using the CLI and the other is by using the J-Web interface.
194