Packing A Qfx10002 Switch For Shipping; Packing Qfx10002 Switch Components For Shipping - Juniper QFX10002 Hardware Manual
Hide thumbs
Also See for QFX10002:
- Quick start manual (2 pages) ,
- Quick start manual (7 pages) ,
- Hardware manual (180 pages)
Table of Contents
Advertisement
• If you are returning the chassis, an appropriate screwdriver for the mounting screws used on your
rack or cabinet.
This topic describes:
Packing a QFX10002 Switch for Shipping
To pack a QFX10002 for shipping:
1.
Power down the switch and remove the power cables. See
139.
2.
Remove the cables that connect the QFX100002 to all external devices.
3.
Remove all field-replaceable units (FRUs) from the device.
4.
Position a mechanical lift under the device. If a mechanical lift is not available, have two people
support the weight of the switch while another person uses the screwdriver to remove the front
mounting screws that attach the chassis mounting brackets to the rack or cabinet.
5.
Remove the switch from the rack or cabinet (see
page
98) and place the switch in an antistatic bag.
6.
Place the switch in the shipping carton.
7.
Place the packing foam on top of and around the switch.
8.
If you are returning accessories or FRUs with the switch, pack them as instructed in
QFX10002 or Component for Shipping" on page
9.
Replace the accessory box on top of the packing foam.
10. Close the top of the cardboard shipping box and seal it with packing tape.
11. Write the RMA number on the exterior of the box to ensure proper tracking.
Packing QFX10002 Switch Components for Shipping
CAUTION: Do not stack switch components. Return individual components in separate
boxes if they do not fit together on one level in the shipping box.
To pack and ship QFX10002 switch components:
• Place individual FRUs in antistatic bags.
• Ensure that the components are adequately protected with packing materials and packed so that the
pieces are prevented from moving around inside the carton.
• Close the top of the cardboard shipping box and seal it with packing tape.
• Write the RMA number on the exterior of the box to ensure proper tracking.
"Powering Off a QFX10002" on page
"QFX10002 Installation Safety Guidelines" on
159.
160
"Packing a
Advertisement
Table of Contents
Troubleshooting
