Ex8208 Cooling System - Juniper EX8208 Hardware Manual

Table 16: Network Port LEDs on Line Cards in an EX8200 Switch—Status LED (continued)
LED
SEE ALSO
Line Card LEDs in an EX8200 Switch | 105

EX8208 Cooling System

IN THIS SECTION
Fan Tray | 54
Airflow Direction in the EX8208 Switch Chassis | 55
LCD Indicator
LED: DPX
LED: POE
State, Color, and Description
Unlit—10 Mbps
Green—Blinking—100 Mbps
Green—On steadily—1000 Mbps
The speed indicators for 48-port RJ-45 line cards are:
Unlit—10 Mbps
Green—Blinking—100 Mbps
Green—On steadily—1000 Mbps
Indicates the duplex mode. The status indicators are:
Green—Port is set to full-duplex mode.
Unlit—Port is not set to full-duplex mode.
Indicates the PoE mode. The status indicators are:
Green—PoE is enabled on the port and a device is
drawing power.
Yellow—PoE is enabled on the port, but no power is
drawn from the port.
Unlit—PoE is not enabled on the port.
53