Connecting An Ex8200 Switch To A Modem - Juniper EX8208 Hardware Manual

2. Connect the other end of the Ethernet cable to the console server (see
management console (see
Figure 59: Connect a Device to a Management Console Through a Console Server
To Console Port
Figure 60: Connect a Device Directly to a Management Console
To Console port

Connecting an EX8200 Switch to a Modem

You can connect an EX Series switch to a modem through the console port on the switch.
Before you connect the switch to a modem:
Perform the initial setup and configuration of the switch. See
Switch (CLI Procedure)" on page 194
Procedure)" on page 198.
Ensure that you have the following parts available before you begin to connect the switch to the modem:
A modem (not provided)
A desktop or notebook computer (not provided)
An RJ-45 to DB-9 adapter (provided)
A phone cable (not provided)
Figure 60 on page 184).
Console Server
PC
or "Connecting and Configuring an EX Series Switch (J-Web
Figure 59 on page
PC
"Connecting and Configuring an EX Series
184
184) or