Ex8208 Switch Configurations - Juniper EX8208 Hardware Manual

EX8208 Switch Configurations

Table 5 on page 27 lists the seven sample hardware configurations for an EX8208 switch—base (AC),
redundant (AC and DC versions), and fully loaded chassis (AC and DC versions)—and the components
included in each configuration.
The switch is shipped in only four of these seven configurations: base (AC with 2000 W AC power supplies),
base (AC with 3000 W AC power supplies), redundant (AC with 2000 W AC power supplies), and redundant
(DC).
Table 5: EX8208 Switch Hardware Configurations
Switch Configuration
Base configuration (AC with 2000 W AC power supplies)
Base configuration (AC with 3000 W AC power supplies)
Redundant configuration (AC with 2000 W AC power
supplies)
Configuration Components
Chassis with backplane
One fan tray
One Switch Fabric and Routing Engine (SRE) module
One Switch Fabric (SF) module
Two 2000 W AC power supplies
Two power cords
Eight line card cover panels
Four power supply cover panels
Chassis with backplane
One fan tray
One Switch Fabric and Routing Engine (SRE) module
One Switch Fabric (SF) module
Two 3000 W AC power supplies
Two power cords
Eight line card cover panels
Four power supply cover panels
Chassis with backplane
One fan tray
Two SRE modules
One SF module
Six 2000 W AC power supplies
Six power cords
Eight line card cover panels
27