Parts Inventory (Packing List) For An Ex8208 Switch - Juniper EX8208 Hardware Manual

Ensure that you know how to handle and store the line card (see Handling and Storing Line Cards in EX6200
and EX8200 Switches).
To unpack a line card (see
1. Move the shipping carton to a staging area as close to the installation site as possible.
2. Position the carton so that the arrows are pointing up.
3. Open the top flaps on the shipping carton.
4. Pull out the packing material, which holds the line card in place.
5. Remove the line card from the antistatic bag.
6. Save the shipping carton and packing materials in case you need to move or ship the line card later.
Figure 36: Unpacking a Line Card Used in an EX8200 Switch
SEE ALSO
Packing a Line Card Used in an EX8200 Switch | 344

Parts Inventory (Packing List) for an EX8208 Switch

The switch shipment includes a packing list. Check the parts you receive in the switch shipping crate against
the items on the packing list. The packing list specifies the part number and description of each part in
your order. The parts shipped depend on the configuration you order. See
on page 27 for more information.
Figure 36 on page 144):
"EX8208 Switch Configurations"
144