Packing Ex3200 Or Ex4200 Switch Components For Shipping - Juniper EX3200 Series Complete Hardware Manual

Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches

Packing EX3200 or EX4200 Switch Components for Shipping

Related Topics
204
Replace the accessory box on top of the packing foam.
10.
Close the top of the cardboard shipping box and seal it with packing tape.
11.
Write the RMA number on the exterior of the box to ensure proper tracking.
12.
CAUTION: Do not stack switch components. Return individual components in separate
boxes if they do not fit together on one level in the shipping box.
To pack and ship switch components:
Place individual boards in antistatic bags.
Ensure that the components are adequately protected with packing materials and
packed so that the pieces are prevented from moving around inside the carton.
Close the top of the cardboard shipping box and seal it with packing tape.
Write the RMA number on the exterior of the box to ensure proper tracking.
Returning an EX3200 or EX4200 Switch or Component for Repair or Replacement on
page 199
Removing a Fan Tray from an EX3200 or EX4200 Switch on page 176
Removing a Power Supply from an EX3200 or EX4200 Switch on page 174
Removing an Uplink Module from an EX3200 or EX4200 Switch on page 177
Removing a Transceiver from an EX Series Switch on page 179
Copyright © 2010, Juniper Networks, Inc.